Announcement

Collapse
No announcement yet.

Craftsman 6" lathe

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Craftsman 6" lathe

    Does anyone know the diameters of the step pulleys on the motor and the countershaft of the Craftsman 6" #101.21400?
    Last edited by budedm; 06-10-2009, 01:41 PM.

  • #2
    I'm sure someone on the Atlas/Craftsman Yahoo Group can answer this. Here's a link

    http://groups.yahoo.com/group/atlas_craftsman/

    Glenn
    So many projects . . . so little ambition! Arroyo Grande, CA

    Comment


    • #3
      On my Craftsman I have at the motor a 3" and a 1.5" diameter pulley. On the countershaft is a 3" and a 5" pulleyon the end to connect with the motor belt: on the shaft for the belt to the headstock is a 2.5", a 2", a 1.5" and a 1.25" diameter pulley gang. Fred

      Comment

      Working...
      X