Announcement

Collapse
No announcement yet.

Jet Lathe GH-1340T

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jet Lathe GH-1340T

    Anyone on this forum own the JET GH-1340T lathe (Manufacture date 1995)? Need info regarding settings.
    For those having fought for it, Freedom has a flavor the protected will never know.
    Freedom is only one generation away from extinction.

  • #2
    Do you have the manual?
    http://content.wmhtoolgroup.com/manuals/M-321810.pdf
    "Those who hammer their guns into plows will plow for those who do not."~ Thomas Jefferson

    Comment


    • #3
      My friend has a manual. He wants to cut 4 TPI and needs to know what tooth number gear to purchase, and then he need to know settings on machine so he can cut 4 TPI. The manual and chart on lathe only show 8 TPI with settings.

      The later model lathe's chart shows settings and gear size for 4 TPI but the 1995 yr lathe does not have same lever settings as the later version.
      For those having fought for it, Freedom has a flavor the protected will never know.
      Freedom is only one generation away from extinction.

      Comment

      Working...
      X