Announcement

Collapse
No announcement yet.

Milling Machine table travel stops

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    Its post 29

    Steve Larner

    Comment


    • #47
      Originally posted by lynnl
      Hmmm. After re-reading post #39 (3 or 4 times actually), I see no mention of that piece. I just see a discussion or the knurled pieces.

      Oh well, doesn't really matter. As I said it just looks thicker in that picture, but without some reference it's hard to tell, even with my carefully calibrated eyeballs.
      I'll have to take my eyeballs in for recalibration--Steve is correct---it was post #29.---Brian
      Brian Rupnow
      Design engineer
      Barrie, Ontario, Canada

      Comment


      • #48
        Brain thanks for the post, I have the Lathmaster LMT25 which is the same as yours and I will put in on the list of things to do.

        Thanks
        Tim
        Last edited by T_henry; 11-06-2009, 07:16 PM.

        Comment

        Working...
        X