Announcement

Collapse
No announcement yet.

Back Gears

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Back Gears

    Can anyone tell me how to engage the back gear on my 6" Atlas lathe. I know about the lever on the headstock but how do I free up the spindel?

  • #2
    There's a sliding pin in the front gear that locks it to the pulleys. Pull on this pin and the chuck should free-spin. Then engage the back gear lever.

    Comment


    • #3
      check for a pin in the bull gear. Pull it out of engagement. That is if it is anything like the 10f lathes.
      gvasale

      Comment


      • #4
        Originally posted by gvasale
        check for a pin in the bull gear. Pull it out of engagement. That is if it is anything like the 10f lathes.
        The 6x18 (Mark I) is like that, too; I have one. You can find more details in the Manual of Lathe Operation and Machinists Tables from Atlas Press (still being sold). See also the following Yahoo forums where you might find more details about the lathe:

        http://groups.yahoo.com/group/atlas618lathe/
        http://groups.yahoo.com/group/atlas_craftsman/

        And of course Tony has lots of goodies here:
        http://www.lathes.co.uk/atlas/
        http://www.lathes.co.uk/atlas6inch/
        http://www.lathes.co.uk/craftsman/

        Jim

        Comment


        • #5

          Comment

          Working...
          X