Announcement

Collapse
No announcement yet.

morse taper adapters

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Black_Moons
    replied
    offhand, Id wager a harden taper will last longer, but a soft taper will be less likey to damage your spindle in a 'whoops' event.

    Leave a comment:


  • 67chevelle
    started a topic morse taper adapters

    morse taper adapters

    I'm in need of some additional morse taper adapters/sleeves.

    There are hardened and ground throughout and hardened tang only adapters available, which should I look for and why?

    They're for a Buffalo #22 drill press and 13x40 lathe..

    thanks
    Mark
Working...
X