Announcement

Collapse
No announcement yet.

Back to the cut knurling tool

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Back to the cut knurling tool

    Could not locate the old thread so here is a new one, sorry. Every time I have time between jobs I do to pay for this hobby I work on the cut knurling tool. My problem is I am almost ready to cut the slot in the arm thru the dovetail. The text says a 1/16 in. saw but the drawing shows .031 for the cut or is that the center of the cut w/ .031 each side of center that would make about 1/16 in. I think 1/16 is correct but thought I would check before cutting.
    thanks
    ed
    Last edited by gr8life; 05-23-2010, 07:08 PM.

  • #2
    http://bbs.homeshopmachinist.net/showthread.php?t=39940

    I just ordered the March issue as my subscription started with the second installment

    Comment

    Working...
    X