Announcement

Collapse
No announcement yet.

What lathe is this and estimated weight?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • JoeFin
    replied
    You would be lucky to have that lathe

    Leave a comment:


  • vpt
    replied
    Another one! From everything I read this is perfect size for me! However it is a bare machine with no tooling which I know can cost me ALLOT later on.

    But I want to know, is this a babbit headstock? estimated motor hp? Also doesn't look like allot of feed speed options. Please let me know what you know about this lathe, the good, the bad, and other stuff. The lathe has been on ebay for over a month.

    http://cgi.ebay.com/14-1-2-SOUTH-BEN...item20b66c000d

    Leave a comment:


  • vpt
    replied
    Yeah I don't think my next lathe will be much over 2000#.

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Originally posted by gwilson
    Probably weighs 6000+.

    I'd say that you are very close. My neighbor machinist friend has a 20" X 72" Monarch lathe that weighs 8,000 pounds according to the shipping company. That's a lot of iron in one place!

    Leave a comment:


  • vpt
    replied
    Yeah the #6000 and 10hp converter don't sound like fun.

    I'l keep watching and hoping.

    Leave a comment:


  • gda
    replied
    Do you have the electric set-up to run the Monarch? 5HP 3 phase, needs a 10HP converter. I've played with some of those monsters at work, they draw some power on start-up.

    Leave a comment:


  • rohart
    replied
    Take a look at http://www.lathes.co.uk/monarch/index.html

    You're taking on a project if you buy a pre WWII lathe.

    Some would bite your hand off, but make sure you're equipped and financed to bring the lathe up to standard if it's worn. You'll probably be able to machine from the start, but wear might produce chatter, poor tolerances and frustration.

    It's the forerunner of a very highly regarded machine.

    Leave a comment:


  • gwilson
    replied
    Probably weighs 6000+.

    Leave a comment:


  • vpt
    replied
    Another lathe close to me. This one is bigger than what I am looking for but the price seems good. Anyone have any info for me like weight of this machine and over all size? Good machine? To big for common projects?

    http://cgi.ebay.com/monarch-metal-la...item19c2676dc9

    Leave a comment:


  • Toolguy
    replied
    Lathe ID

    That looks like your basic Chinese import. Weight will be 1200 to 1800 pounds.

    Leave a comment:


  • vpt
    started a topic What lathe is this and estimated weight?

    What lathe is this and estimated weight?

    Lathe close to me on CL for sale by lady. Anyone know what lathe this is by the pic and an estimated weight?


Working...
X