Announcement

Collapse
No announcement yet.

Clausing Tailstock Wrench

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ENTERPRISE LATHE
    replied
    wrench

    Your right it is the dedicated wrench, I contacted Joe at plaza he has nothing right now.

    Leave a comment:


  • recoilless
    replied
    This is the "dedicated" wrench you are referring to I suppose? I have one, unfortunately it's attached to my 6329 TS. Have you checked with Joe B at www.plazamachinery.com?

    Leave a comment:


  • ENTERPRISE LATHE
    replied
    wrench

    yes it is the wrench that tightens the t/s to the bed, any 7/8 regular wrench works but not alot of room the original hooks on the bolt to allow it to pivot back and forth on the nut flats.

    Leave a comment:


  • Ian B
    replied
    When you say "tailstock wrench", do you mean the one to tighten a nut to clamp the tailstock to the bed? I can't really think of any other wrench that you might use on a tailstock.

    Wouldn't any wrench that fits the nut do, or am I miles off?

    Ian

    Leave a comment:


  • ENTERPRISE LATHE
    started a topic Clausing Tailstock Wrench

    Clausing Tailstock Wrench

    Does anyone know where I could fine the original tailstock wrench for a clausing 6300 lathe?
Working...
X