Announcement

Collapse
No announcement yet.

Newbie: Looking for drill chuck arbor

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • RobbieKnobbie
    replied
    Try www.use-enco.com or www.mcmaster.com. If they don't have it, it probably isn't made.

    Leave a comment:


  • kc5ezc
    replied
    KYFHO: I got mt1 x jt 2 and jt 6 from Wholesale Tools. They probably have mt1 by 3/8 24 also. If not I think you could turn and thread the mt1 x jt2 down to 3/8 by 24 if they are not hard. They are online and have a pretty good web site.

    Leave a comment:


  • Mark Hockett
    replied
    You might try these guys for the arbor if it's an Atlas 6" X 18",

    http://littlemachineshop.com/

    BTW I have a set of NOS change gears for sale.

    Leave a comment:


  • kyfho
    started a topic Newbie: Looking for drill chuck arbor

    Newbie: Looking for drill chuck arbor

    I'm looking for a drill chuck arbor for the tail stock of my little Atlas Craftsman lathe.

    I need a 1MT to 3/8"-24 threaded drill chuck arbor.

    Haven't had any luck Googling. Any pointers.

    I'd try to make my own, but I don't have the gears for threading on the lathe.
Working...
X