Announcement

Collapse
No announcement yet.

Bit the bullet today

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bit the bullet today

    Finally got up the nerve to buck up for a Kurt D688. Bolted it down, and dialled it in, then made the first cut. What a difference from the POS Elephant brand I was using!!!

  • #2
    Hard to go wrong with a Kurt.

    Brian
    OPEN EYES, OPEN EARS, OPEN MIND

    THINK HARDER

    BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE

    MY NAME IS BRIAN AND I AM A TOOLOHOLIC

    Comment


    • #3
      ...Kinda makes you wonder why you waited eh!

      You will not regret the extra few bucks for the 688 over the 675 either, it will prove useful.
      If you don't have one already get one of the 3 or 4 spoked speed handle thingies too, it will make a world of difference.

      Is the old POS vise resting peacefully at the bottom of the Fraser?

      Chris

      Comment


      • #4
        Probably 95% of my tools are Chinese/Taiwan, with 3-4 'bad apples cast out, and I enjoy using the rest with no complaints in my home shop environment.

        But... when I got my 675 Kurt and set aside the Chinese clone, I was blown away at the difference. I had heard all the ho-haw and praises, but kept blowing it off as "a bit too much" -- for a 'vise'? Well, color me a believer now, there is a remarkable difference in a Kurt - I love mine.
        If everything seems to be going well, you have obviously overlooked something........

        Comment


        • #5
          Which POS Chinese vise are we talking about here.

          Phil

          Comment


          • #6
            Klem, Your new Kurt 688 has got to be a super nice vise. I have a 25 year old Kurt D60 bought new & it was the "bees knees" in its day and the newer models are even better.

            Comment


            • #7
              Same here.... Bought my 688 two years ago and could not be happier. Good tools are just so nice to work with.

              Comment


              • #8
                Also bought a Kurt

                I have quite a few Machine vices but the kurt is one of my favorite . I bought it at a auction for 50 dollars from the machine shop owners Wife. It was like new. What a shame to sell one so cheap eh ???

                Comment


                • #9
                  After buying a new VMC the thought of using a used Kurt was tossed aside and a new one was purchased. It was like night and day between the used Kurt and the new Kurt. Needless to say all the used ones were dumped. Based upon finding extreme runout after a couple of years of use I now consider the vise consumable tooling.

                  Comment


                  • #10
                    Congrats on purchasing and enjoying some quality......one of the frequent questions for noobs starting out here......and I guess with reason given the price differences, being that a vice is usually ground zero of any operations about to take place I took that advice and stepped up to the plate right off the bat.......that recent Vancouver craigslist ad was tempting though, it would be nice to have 2 at times.......heck I would have bought the lot and flogged the rest........
                    Opportunity knocks once, temptation leans on the doorbell.....

                    Comment

                    Working...
                    X