Announcement

Collapse
No announcement yet.

ENCO 10% off and Free Shipping Codes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ENCO 10% off and Free Shipping Codes

    This is my first post so I thought I would start off right....

    Use

    EDDF for free shipping
    EDDC for 10% off

    Both can be used together and expire 12-31-2010!

    Enjoy

  • #2
    Works as advertised. Thanks and welcome aboard!

    Doug

    Comment


    • #3
      What's the minimum purchase, $25, $99, $199?

      Comment


      • #4
        No minimum, which means I don't have to pad my order out to $150, just to get both discounts.

        Comment


        • #5
          Dang I hate it when they do that! Don't know why I even bothered to ask about a minimum because I always run well over $100 even when I only intend to spend $25 or so. I keep looking at the stinkin sales flier and thinking "this is already on sale and with 10% off/free shipping I will have to squeeze it in too", that happens several times before I finally have to stop. It's a sickness I tell ya.

          Comment


          • #6
            Originally posted by Christian79
            This is my first post so I thought I would start off right....
            Welcome to the bick-fest. Throw on your rubbers and enjoy the machining-related content!

            Comment


            • #7
              Originally posted by radkins
              Dang I hate it when they do that! Don't know why I even bothered to ask about a minimum because I always run well over $100 even when I only intend to spend $25 or so. I keep looking at the stinkin sales flier and thinking "this is already on sale and with 10% off/free shipping I will have to squeeze it in too", that happens several times before I finally have to stop. It's a sickness I tell ya.
              Just placed an order. I needed one 15/16" drill bit. They had Triumph bits on sale ... should've only cost ~ $24 before the 10% discount. My order totaled $175 after the discount What happened?

              Comment


              • #8
                The Enco site has a habit of remembering things that were in your cart from the last time you were logged in. Check again and you'll likely see something was carried forward.

                Comment


                • #9
                  Christian -- thanks so much! I'm placing an order right now.

                  For those of you thinking about using the codes, they expire tomorrow! Tick tock...
                  "Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did."

                  Comment


                  • #10
                    Yep, good first post Christian, thanks
                    Those codes, Tim's post on his new bandsaw cost me tonight when I pulled the trigger for one of Turn-Pro 7x12 gear head Bandsaw that was on sale. Plus a few little extra goodies, but forgot the spare bi-metal blade.

                    The tick-tock is now waiting till it gets here, and then where will I put it

                    Comment


                    • #11
                      Originally posted by lazlo
                      Christian -- thanks so much! I'm placing an order right now.

                      For those of you thinking about using the codes, they expire tomorrow! Tick tock...
                      I'm starting to think maybe Christian WORKS for Enco. He got me too....

                      Thanks, by the way!

                      Comment

                      Working...
                      X