Announcement

Collapse
No announcement yet.

Source for Hardware/Threaded Rod

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Source for Hardware/Threaded Rod

    I need to make some inserts that have an external 9/16" - 18 thread. I figured the quickest way to do this is to cut them from threaded rod or bolts.


    Anyone know of a cheap source for a few 9/16 - 18 bolts or about a ~1' length of 9/16-18 threaded rod? I don't think the big box stores will have 9/16 fine pitch fasteners, although I will look tomorrow.

    I know McMaster sells what I want for about $5. That's perfect, except the shipping ends up being about $11. It kind of hacks me off that the shipping is more than twice the cost of the product...

  • #2
    Graingers has it -about $9 per 3 feet.

    Comment


    • #3
      Amazon 2' length oil coated, $5.11 made in the USA

      http://www.amazon.com/Made-USA-21207...4629934&sr=8-4

      Comment


      • #4
        Or, a hardware store that actually has bigger sizes.

        Comment

        Working...
        X