Announcement

Collapse
No announcement yet.

Clausing 5904 help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • justanengineer
    replied
    Seems like they should be about the perfect size for a flat rate box so at least shipping should be cheap. Clausing made those lathes by the thousand, so there should be plenty out there if he wants a used one. I might agree with Dr Stan and go about making a new one if it was me though.

    Leave a comment:


  • macona
    replied
    Try Plaza Machinery?

    http://www.plazamachinery.com/

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Sounds like he needs to buy a piece of cast iron and start machining a new one.

    Leave a comment:


  • EdC
    started a topic Clausing 5904 help

    Clausing 5904 help

    I have a friend with an old 5904 and it sounds like his compound slide broke...he has tried to locate a replacement but no luck. Clausing doesn't have that casting anymore and told him there were several changes through the years for it...

    I have not seen the actual part since he is several states away but if anyone can help me chase down a part or give me a direction to point him in it would be much appreciated

    Thanks Ed
Working...
X