Announcement

Collapse
No announcement yet.

Titanium Sources

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Titanium Sources

    I ned to find a sources 1 inch round bar stock, anyone have a good source?? I can't find Titanium Joes on the web.

    Jerry

  • #2
    I found Titanium Joe on the internet.

    Jerry

    Comment


    • #3
      I would just check the regular ebayers...Titanium Joe as you mention, Spencer Bro's, Covers Machine(?), etc.

      I've done business with them all and come out with acceptable deals.

      How much 1" do you need and does alloy matter and how much do you want to pay?


      [This message has been edited by abn (edited 01-02-2004).]

      Comment


      • #4
        an outfit called "Small Parts Inc" (I think they're in Florida) sells Ti stock I'm pretty sure....worth checking out, they've got a website and I believe the sell in pretty small quantities...

        Chris

        Comment


        • #5
          .

          [This message has been edited by pgmrdan (edited 03-08-2004).]

          Comment


          • #6


            www.onlinemetals.com

            Comment


            • #7
              www.mcmaster.com sells titantium rod.

              Mike
              Mike Henry near Chicago

              Comment


              • #8
                A side note on titanium.....

                In a friends's shop they used to machine containers out of 6"+ diameter Ti bar stock. They could have used tubing, but none was available. For years they bored out the center of the bar stock to create their own tube. This created some expensive chips, not to mention the tooling costs and time spent.

                Last I heard, they had found someone in LA who could trepan out the center slug. The trepanning was done for free in exchange for getting to keep the center slug.

                Comment


                • #9
                  I wish I could find thick walled Ti tubing, if anyone has some one inch round stock for sale or trade? The alloy isn't important, I am just experimenting at the moment.


                  Jerry

                  Comment


                  • #10

                    I have have good luck with Titanium Joe
                    he was able to get the sizes I needed at
                    a reasonable price ( a pretty good guy
                    considering he's a Canadian)
                    Non, je ne regrette rien.

                    Comment


                    • #11
                      How much do you need?

                      Comment

                      Working...
                      X