Announcement

Collapse
No announcement yet.

Chip breaker broke, SS razor wire from Hell everywhere

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Chip breaker broke, SS razor wire from Hell everywhere

    Ok, I tried every way listed in the machinery handbook to make a chip breaker. None worked. I was cuttin Stainless 17-4 (630) on the lathe. I was using cabide insert 1/2 bits. I tried all speeds and feeds to no avail. What am I missing? How is a chip breaker made for stainless?

    I'm typeing slowly because I only hav e7 fingers left!!!

  • #2
    deleted - duplicate thread
    Last edited by lakeside53; 04-04-2011, 12:50 AM.

    Comment

    Working...
    X