Announcement

Collapse
No announcement yet.

roughing cuts

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bryce.R
    replied
    Turning? Milling? Turning
    .800 per pass? 80 thou per pass
    RPM? Feedrate? 250 rpm feed= .046 inch/rev

    Leave a comment:


  • KiddZimaHater
    replied
    Turning? Milling?
    .800 per pass?
    I hope you meant .080
    RPM? Feedrate?

    Leave a comment:


  • Bryce.R
    started a topic roughing cuts

    roughing cuts

    I am getting chater when takeing 0.80 thou cuts in bright bar. any way to stop it?
Working...
X