cincinatti horizonal help

[j king]

All repaired..had a pin sheared.had to remove the side panel.boy that was a heavy chunk! I think it has been broke for a while.probably pre my possession .. -

[Joel]

Just took a look at mine and I think Wierd has to be right. The side panel has to come off and it's probably (hopefully) something simple like a sheared pin. I have never had that part of mine apart, so can't offer any useful advice. The probable good news is that everything I have had to fix on that machine was relatively simple and straightforward.

[beckley23]

Don't know about your model, but the Cincinnati's I've worked on had hydraulic actuation. How's your oil pressure and level? The manual should be a big help, here.
Harry

[j king]

Yes it does...looks like ill need to disassemble it..

[wierdscience]

Doesn't that lever control the drive clutch?Maybe it dropped a pin in the linkage?

[j king]

My cinel 60 horizontal mill,same as a #2 kinda...

I was running it and using the long lever that controls spindle.The lever quit working after I stopped the spindle.It feels free like there is no resistance on handle. It wont do anything now...I shifted gears and I hear that working. It feels like the switch stuck since there is no feel. Anyone have any experience like this and some advice?

I hate to tear the side panel off if there is an easy fix..Thanks Jim.