.png)
Tweet
Exactly Evan, positive rake (bottom example).
Internal threading tool, tip is 90 Deg to shank of tool. Carbide tip brazed onto a steel shank (maybe I didn't explain that very well) with about a 5 Deg. positive rake, pre-ground to 60 Deg and not a cheap offshore tool, see picture above.
Sorry if there was some confusion.
Internal threading tool, tip is 90 Deg to shank of tool. Carbide tip brazed onto a steel shank (maybe I didn't explain that very well) with about a 5 Deg. positive rake, pre-ground to 60 Deg and not a cheap offshore tool, see picture above.
Sorry if there was some confusion.
Comment