Announcement

Collapse
No announcement yet.

Nardini TT 1230E lathe

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Nardini TT 1230E lathe

    I am trying to put a TT 1230E back together. I saved it from going to scrap. It is in good shape except I think at least two gears are missing. The gear on the spindle shaft and the gear on the aux shaft. I could run it now I just would have to do everything by hand feed and I could not cut threads.
    What I need is a picture of the gear box. Remove the top and take a picture from the back facing down. It would be nice to know the demintions of the gears I am missing as well. I don't know if a manual would have what I need, but I found one place to buy a manual for a 1200 for 65.00 I do not know if it would be the righht one or not. Any help would be appreciated.

  • #2
    How is your spanish?

    It looks like DEB'MAQ in Brazil acts as the marketing and parts representative
    for Nardini manufacturer Industrias Nardini S.A.

    DEB'MAQ has an English language site, but it has virtually no functionality.

    Their Spanish site is fully-featured and includes a section for Nardini.

    A closer source might be Weldon Childress of
    Dixie Machine Tools
    1805 E. Main St.
    Easley, SC 29644
    Ph: 864-859-7576
    Fax: 864-859-7684

    www.dixietool.com

    There was announcement years ago about an alliance between importer
    Rem Sales and distributor Dixie Machine. Some time after that, Rem ceased
    promoting Nardini, but Dixie reportedly still has/had Nardini machines as of
    '08 according to a post by Milacron on PM.

    .

    Comment


    • #3
      As a supplemental, I notice that long time Canadian machine tool and parts
      distributor HH Roberts has an announcement to the effect that they have
      just begun to represent Nardini. Look midway down the page on the following
      link.
      HH Roberts

      Parts in Stock

      "BREAKING NEWS (sound like CNN doesn't it) Sept 30/11
      We have just been authorized to order parts from Nardini direct in Brazil.
      REM Sales are no longer supporting these machines. It will take us a while to
      get this organized but we are starting. Some parts are in our stock and we
      can get others on demand"

      HH Roberts has an extensive collection of manuals and parts lists available
      for download. However, there is nothing for Nardini at this time.

      .

      Comment


      • #4
        Originally posted by 71gc
        I am trying to put a TT 1230E back together. I saved it from going to scrap. It is in good shape except I think at least two gears are missing. The gear on the spindle shaft and the gear on the aux shaft. I could run it now I just would have to do everything by hand feed and I could not cut threads.
        What I need is a picture of the gear box. Remove the top and take a picture from the back facing down. It would be nice to know the demintions of the gears I am missing as well. I don't know if a manual would have what I need, but I found one place to buy a manual for a 1200 for 65.00 I do not know if it would be the righht one or not. Any help would be appreciated.
        PM Sent regarding a manual

        Comment


        • #5
          I have the same machine I can PDF you the book if you like PM me if you want it

          Comment

          Working...
          X