Announcement

Collapse
No announcement yet.

Bridgeport type Motor needed!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bridgeport type Motor needed!

    I bought a 3HP Hightower Bridgeport clone in great shape except the motor is gone. I have the clutch/vari drive parts just not the motor. I can use 1 or 3 phase. Any help in locating one will be appreciated. I hate to spend a fortune but it's a nice machine but I can buy a real 2HP Bridgeport for $500 & I just can't bring myself to scrap anything thing that still has life in it, especially old stuff. Thanks!

  • #2
    Could you make an adapter plate and run a "C" face motor?

    Comment


    • #3
      If this is the typical bridgeport long shaft style motor you can try to get fairly cheap c face motor and extend the shaft via welding on a stub and turning down the shaft then cutting a keyway in it. Somewhere on here or PM there is a nice thread on just such a project.

      Comment


      • #4
        Motor

        A replacement motor not available? Rewind the old one. It is not too difficult as the three hp size is large enough manually wind in the coils. Carefully take the old one apart and make notes of the coil placement.

        JRW

        Comment


        • #5
          Problem is the motor is not bad, it missing.

          Comment


          • #6
            flylo,
            If you are interested in a real 2HP Bridgeport motor(new) send me a PM.
            JIM : You don't get a 2nd chance to make a 1st impression.

            Comment


            • #7
              This guys has been advertising 3 and 5hp bp clone motors for month on the seattle CL

              http://seattle.craigslist.org/tac/tls/2670835443.html

              Comment


              • #8
                Thanks! I was looking for a motor & bought a nice 2HP Brideport for $500 but I still want to get the Hightower going. I like it better for some reason.

                Comment


                • #9
                  Careful... they breed...

                  Comment


                  • #10
                    3 so far and that's after I sold a small Grizzly last week. They also seem to get larger but bigger is better they say. Although I was having a blast tonight turning alum on my newly acquired Atlas 6x18 lathe. For some reason I just love it. It's just a shrunken 12x36.

                    Comment

                    Working...
                    X