Announcement

Collapse
No announcement yet.

Need help in Identifying part

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Randal
    replied
    Thanks everyone for the replys! They have been very helpful!~ The part is threaded on an internal rod inside a pair of tongs.

    Leave a comment:


  • Doozer
    replied
    If you have a print, Misumi will make them for you in China.
    Any quantity you want.

    --Doozer

    Leave a comment:


  • Ernie
    replied
    It looks like the adjusting part at the end of a bicycle brake cable.
    Ernie

    Leave a comment:


  • philbur
    replied
    Looks like parts from a small turnbuckle or tie rod arrangement

    similar to the bottom of this page:

    http://www.pacificmarine.net/stainlessturnbuckles.htm

    or parts here:

    http://www.pacificmarine.net/quickattach.htm
    http://www.pacificmarine.net/quickattacheye.htm

    Phil

    Leave a comment:


  • Hogridnfool
    replied
    Do a search for swageless mechanical fittings. What is the end use for them?

    Leave a comment:


  • Randal
    started a topic Need help in Identifying part

    Need help in Identifying part

    I need help in identifying this part. It's the part in the middle of this picture.
    It is threaded inside and threads into a threaded rod. I don't know the thread size, it's small and the overall lenght of this is maybe 3/8's. It's stainless steel I believe. anyone know what this is called and WHERE I could purchase a quanity of them? Thanks in advance!

    Randal Berry





    Uploaded with ImageShack.us
Working...
X