Announcement

Collapse
No announcement yet.

Gib Screw

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gib Screw



    I had to make a new gib adjusting screw for the Wells-Index. It took me three tries, but I finally did it. The threads are single pointed. I cut the slot with a moto-tool.

  • #2
    Nice! Unfortunately it reminds me that I have to make one for one of my machines and I've been putting that off. The flange on the screw is so much narrower than the slot in the gib it's not doing the job it's supposed to.
    .
    "People will occasionally stumble over the truth, but most of the time they will pick themselves up and carry on" : Winston Churchill

    Comment

    Working...
    X