Announcement

Collapse
No announcement yet.

Best Practice IEC B14 face mount

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Best Practice IEC B14 face mount

    I am about to machine a mounting for an IEC B14 face mount motor, frame size 63. I assume that the circular recess that I machine should be deep enough to ensure that the motor pulls up only on the flange face with the securing holes in it, not the smaller central boss. I assume that the central boss is simply to provide an accurate radial register.

    Is this correct?
    Bill
Working...
X