Announcement

Collapse
No announcement yet.

Looking for rifle rest article in HSM or MW??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Daron Klooster
    replied
    Here are couple more articles you could look at to see if they're what you're looking for:
    • Building a Rifle Rest by J. Randolph Bulgin: June/July 2004
    • A Bench-mounted Spotting Scope Stand by David Gere: August/Septmeber 2011.


    I hope this helps!

    Leave a comment:


  • RPease
    replied
    Thank you sir.......That's the one. Not sure how I missed it. I was fairly convinced that it was in the last couple of years, but guess I just "overshot" the recent issues and ended up with the 2004 version.

    Didn't do me any harm to peruse through a dozen years of HSM and MW . It gave me a chance to look at older projects that I've been wanting to work on. Maybe it will rekindle a fire..........

    Thanks again.........Rodg

    Leave a comment:


  • JCHannum
    replied
    Here's one Jim Dunmyer built from a Machinist's Workshop article in 2010;

    http://bbs.homeshopmachinist.net/sho...ght=rifle+rest

    Leave a comment:


  • RPease
    started a topic Looking for rifle rest article in HSM or MW??

    Looking for rifle rest article in HSM or MW??

    Hi all,

    I'm looking for a rifle rest build article that appeared in HSM or MW in the past 10-12 yrs.

    I found one from June-July 2004 in MW, but my memory (poor sometimes) tells me that there might have been another article with a different style. It (2004 version) just doesn't seem like the one that I remember. Either that or maybe I just remember a reader comment where they sent in a photo of their own similar project.

    I searched through the article index, but maybe I missed any additional article(s) or just didn't recognize what I was seeing for what it was.

    There's always the chance that I saw something "on line"............but I really think it was in one of the mags from VP.

    Any help would be appreciated.

    Best regards.......Rodg
    Last edited by RPease; 05-16-2012, 10:16 PM.
Working...
X