Announcement

Collapse
No announcement yet.

Insert tooling for Small CNC Lathe

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Insert tooling for Small CNC Lathe

    Over the last couple of weeks I have become the owner of an almost new, Syil
    C6B CNC Lathe, which is a Sieg C6 that has been CNC'ed by Syil.
    It is fitted with a Dickson style quick change toolholder which will do for a while
    until I learn how to work it!
    What I want to find is a set of reasonably priced insert style tool holders, which take conventional inserts, Not the cheap sets where you have to buy a full set of seven or eight inserts with massive tip radii and negative rake for a 1/2 hp lathe.
    And not overpriced like that Australian supplier!
    Will
    Looking for 1/2 inch to 5/8 shanks
    Last edited by wbleeker; 07-17-2012, 04:56 AM.

  • #2
    Try Kennametal or if your looking for something cheaper try these guys http://www.mcjing.com.au/categorybro...?categoryid=25
    Iv bought indexible parting blades here they cost 30 dollars and run better in my lathe than a $200 kennametal one hope this helps

    Comment


    • #3
      I've bought insert holders and inserts from CTC Tools in Hong Kong and haven't been disappointed yet. Packages take a week or three to get here, postage charges are reasonable.

      http://www.ctctools.biz/servlet/StoreFront

      Comment


      • #4
        Glanze also make some decent smallish indexable tooling at reasonable prices
        https://www.flickr.com/photos/csprecision

        Comment


        • #5
          Ceramic is good

          These inserts avaliable from The Carbide Depot can be used on the small cheap import tool holders and they work great.

          Byron Boucher
          Burnet, TX

          Comment


          • #6
            Little Machine Shop sells Warner HSS inserts and holders. After you get started, you might want to look into those as well. They would be well suited to your 1/2 hp lathe.

            bob

            Comment

            Working...
            X