Announcement

Collapse
No announcement yet.

Hey,Gunsmith,guess what?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hey,Gunsmith,guess what?

    I took apart my Buffalo iron worker today and geuss what the bull gear has for keyways?Yep,round keys!3.5" shaft with 1" round keys 180 apart.Only one problem,the machine left the factory without the keyways milled in the shaft,so geuss what I,m going to do next week?
    I just need one more tool,just one!

  • #2
    Fantastic. If they can use it so can I. Thanks for releaving some doubts I was having. How is the machine working if they did not mill the shaft????

    Comment


    • #3
      Its not working,thats how I got a $68,000 machine for $535.00 They had these two little dinky 1/2-13 setscrews drilled into the interface,they of course sheared and dropped the machine out of time which locked it up solid,since the machine is all fabricated and forged steel I wasn't the least afraid of buying it,you can fix anything with a welding rod and a machineshop.
      I just need one more tool,just one!

      Comment

      Working...
      X