Announcement

Collapse
No announcement yet.

Threading dial for Clausing/cholchester

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Threading dial for Clausing/cholchester

    When I go my Clau/Chol. about 2 years ago it came with a trav-a-dial mounted where the threading dial should be, threading dial was in a box. In order to thread I had to one and istall the other, much PITA. Today I rectified the problem by mounting the threading dial at the other side of the apron. pics below. Pic one shows the trav-a-dial in place of the threading dial


    This pic shows the trav-a-dial in place of the treading dial.


    This one shows the threading dial moved to the left side of apron.
    Life should be a little easier now.
    ------------------
    Paul G.

    [This message has been edited by Paul Gauthier (edited 03-05-2004).]

    [This message has been edited by Paul Gauthier (edited 03-05-2004).]
    Paul G.

  • #2
    Good job. You could have mounted it beside the trav-l-dial too. Hey, clean that chip pan out!

    Comment


    • #3
      I have that exact model of the trav-a-dial...mine is mounted to the right side of the threading dial...

      If you ever need any spare parts for your trav-a-dial, ask me...i have a broken one sitting in a drawer...those are $575.00 brand new...

      brent

      Comment

      Working...
      X