Announcement

Collapse
No announcement yet.

4-way toolpost repair

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 4-way toolpost repair

    Can a 4-way toolpost be cleaned up on the clamping face where the tools sit?

    I have one on my Colchester student and it's getting a bit rough, well it was rough when I got it

    Just wondering as it looks an easy job on the mill but thought I'd check before buggering it up.

    Dave
    If it does'nt fit, hit it.
    https://ddmetalproducts.co.uk
    http://www.davekearley.co.uk

  • #2
    Simply turn it on edge and use the side of a carbide endmill all the way around. It should be a few minute job.

    Comment

    Working...
    X