Announcement

Collapse
No announcement yet.

Idea's on a cheap, nice CNC project

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    I actually DID think about a CNC plotter that would draw ink on the board, but the big problem is the ink itself. has to be pretty thin for uniform thin traces, and has to air dry not to fast. I suppose an "ink jet" idea could be used to coat the board with the pattern, but my success with using a normal ink jet printer is bad (about 14 have taken the "flight of shame" out my office window (before I realized I could get rods, motors and other good stuff out of them) as they ALWAYS gum up unless you print something at LEAST every day. Now I stick with Laser.

    Comment

    Working...
    X