Announcement

Collapse
No announcement yet.

Back Issues or copies of articles

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Back Issues or copies of articles

    I think this forum and the Home Shop Machinist magazine are just great. I have had only one problem and that is getting instructions on obtaining "Back Issues"

    I am willing to accept xerox copies of a specific article I'm interested in but cannot find a person to talk or write to. I tried a 3rd party microfilm and copy source but they no longer provide the service.

    Can anyone assist me, please?

    ------------------
    Contemporary Blacksmith with building projects from foundry to an S/C Cobra
    Contemporary Blacksmith with building projects from foundry to an S/C Cobra

  • #2
    Most issues are available contact: [email protected]

    Comment


    • #3
      Or call the 800 number listed in the magazine. 800-447-7367.

      Page 77 of the new HSM gives the information.

      Just call them with a list of back issues you want and have your credit card handy. They're very reasonably priced when compared with some other magazines I've dealt with.

      Comment


      • #4
        This might be of interest to you,

        Opps, that didn't work. How about this?

        http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&category=280&item=420770804 4&rd=1&s sPageName=WDVW

        http://cgi.ebay.ca/ws/eBayISAPI.dll?...sPageName=WDVW

        [This message has been edited by G.A. Ewen (edited 04-29-2004).]

        [This message has been edited by G.A. Ewen (edited 04-29-2004).]
        To invent, you need a good imagination - and a pile of junk. Thomas A. Edison

        Comment

        Working...
        X