Announcement

Collapse
No announcement yet.

Online bandsaw blade recomendations

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • bosox
    replied
    I got the 601 Series bi metal blade of sawblade.com .

    Leave a comment:


  • PT Doc
    replied
    Lenox diemaster m42 are great. Bandsawbladesdirect.com or something similar had good pricing.
    Last edited by PT Doc; 06-25-2014, 12:33 PM.

    Leave a comment:


  • wierdscience
    replied
    I switched from McMaster to Sawblade.com

    https://www.sawblade.com/

    Have not regretted it,not that there was anything wrong with Mac,they do have excellent service,it's just Sawblade had the same quality blade for about 25% less and they have dedicated saw blade specific tech support.

    Leave a comment:


  • darryl
    replied
    Lennox Diemaster II is a good blade.

    Leave a comment:


  • Tim The Grim
    replied
    Customblades.com has been my source for 15 + years. I have never broken a blade from them and I'm not gentle.

    Leave a comment:


  • Richard King
    replied
    Call Tom at Blue Ribbon Abrasives, he has them made up special from a company here in the good old USA. He told me he doesn't sell cheap stuff. Sells good stuff for a good price as he is a one man show with low overhead. Rich
    http://www.blueribbonabrasives.com/

    Leave a comment:


  • GEP
    replied
    It you need a blade and want to spend the extra Lenox Bi metal is the way to go

    Leave a comment:


  • RWO
    replied
    My last couple of blades have been Starrett Bi-metal from MSC and have served well.
    RWO

    Leave a comment:


  • KJ1I
    replied
    I get Bosch and Lenox blades from Amazon. I'm a prime member so shipping is figured into the cost.

    Leave a comment:


  • daryl bane
    replied
    Mcmaster-Carr. I got some blades from them years ago, they were made in England, superb.

    Leave a comment:


  • Abner
    started a topic Online bandsaw blade recomendations

    Online bandsaw blade recomendations

    I have a Jet 4 x 6 bandsaw, uses 64.5" blades. My local retailer closed down due to HF moving in. Tried the HF blades and they are the worst I have ever used - never again.
    Back at square one.
    Anyone have recommendations of an online blade source they have been happy with?

    Thanks,
    Abner
Working...
X