Announcement

Collapse
No announcement yet.

September Issue Errata

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • September Issue Errata

    On page 6 of the latest issue of Home Shop Machinist under "errata", a link is listed to info on making a four tooth involute gear cutter. The link given is

    www.metalwebnews.com/howto/gear/gear1.html

    Can anybody link to it or have a better address? Don't work for me!

    Bob

  • #2
    Pretty sure I have that saved, but it's under a different name. I'll upload it presently.

    EDIT: It is the same page, but I found the original saved by the waybackmachine. I would suggest that anyone who thinks they might find it useful in the future saves the page to their hard drive using file - save as - web page.

    Here's a valid link:

    http://web.archive.org/web/201404030...ear/gear1.html
    Last edited by Peter.; 08-25-2014, 04:52 AM.
    Peter - novice home machinist, modern motorcycle enthusiast.

    Denford Viceroy 280 Synchro (11 x 24)
    Herbert 0V adapted to R8 by 'Sir John'.
    Monarch 10EE 1942

    Comment


    • #3
      Thanks for the link to the archived page Peter. I checked the link out prior to printing, but it apparently didn't last much past that.

      The information on that page was written by John Stevenson and I believe he has posted similar material here.
      George
      Traverse City, MI

      Comment


      • #4
        new link doesnt work either (for me):

        503 Service Unavailable

        Comment


        • #5
          Works fine here Dian. On top of that, many of the drop-box files, links and downloads are still good.
          Peter - novice home machinist, modern motorcycle enthusiast.

          Denford Viceroy 280 Synchro (11 x 24)
          Herbert 0V adapted to R8 by 'Sir John'.
          Monarch 10EE 1942

          Comment

          Working...
          X