Announcement

Collapse
No announcement yet.

September Issue Errata

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Peter.
    replied
    Works fine here Dian. On top of that, many of the drop-box files, links and downloads are still good.

    Leave a comment:


  • dian
    replied
    new link doesnt work either (for me):

    503 Service Unavailable

    Leave a comment:


  • George Bulliss
    replied
    Thanks for the link to the archived page Peter. I checked the link out prior to printing, but it apparently didn't last much past that.

    The information on that page was written by John Stevenson and I believe he has posted similar material here.

    Leave a comment:


  • Peter.
    replied
    Pretty sure I have that saved, but it's under a different name. I'll upload it presently.

    EDIT: It is the same page, but I found the original saved by the waybackmachine. I would suggest that anyone who thinks they might find it useful in the future saves the page to their hard drive using file - save as - web page.

    Here's a valid link:

    http://web.archive.org/web/201404030...ear/gear1.html
    Last edited by Peter.; 08-25-2014, 04:52 AM.

    Leave a comment:


  • w4npx
    started a topic September Issue Errata

    September Issue Errata

    On page 6 of the latest issue of Home Shop Machinist under "errata", a link is listed to info on making a four tooth involute gear cutter. The link given is

    www.metalwebnews.com/howto/gear/gear1.html

    Can anybody link to it or have a better address? Don't work for me!

    Bob
Working...
X