Announcement

Collapse
No announcement yet.

Interesting Micro100 video

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • peekaboobus
    replied
    It doesn't need to be strobe. It works on similar principles but its a digital camera. Probably high frame rate. So they simply have to match multiples of the camera's rated FPS with the spindle RPM, and they can pick out the frames in a nice number. It looks 'flashy' because they probably did some video editing to take out each frame that was the effect of the discontinuity. Just a guess. If I had to to do it, I wouldn't use strobe. I'd just match the camera FPS to the spindle RPM and then do software editing. Either way its really neat. First time seeing it like that on a lathe. I've seen similar videos for milling, but thats easy. They actually just cut the material in half for that so you can see boring and threading ops.

    Leave a comment:


  • Willy
    replied
    Yes thanks for the video link JR.
    Somebody definitely had their thinking cap on when requested to get a shot of what goes on inside of the bore during a cut.
    "Come on kid, show em' what our tool bits are up to".
    Novel idea!

    Leave a comment:


  • macona
    replied
    I think it is strobe but probably synced to the z marker on the spindle encoder. Pretty cool.

    Leave a comment:


  • DICKEYBIRD
    replied
    Awesome video, thanks JR! They definitely make some great tooling.

    Leave a comment:


  • peekaboobus
    replied
    Originally posted by JRouche View Post
    Hope this wasn't posted here before. It shows the internal turning while its happening. Strobe light action I think. JR

    https://www.youtube.com/watch?v=Ea1GzQt3c5Q
    Thats a nice technique! Similar to strobe light. Probably matching the RPM of spindle with camera FPS so they can pull out each frame to create the video. Although its not a pure representation of an actual cut because its an interrupted cut.. but for an educational video its amazing.
    Last edited by peekaboobus; 01-20-2015, 08:44 PM.

    Leave a comment:


  • JRouche
    started a topic Interesting Micro100 video

    Interesting Micro100 video

    Hope this wasn't posted here before. It shows the internal turning while its happening. Strobe light action I think. JR

    https://www.youtube.com/watch?v=Ea1GzQt3c5Q
Working...
X