Announcement

Collapse
No announcement yet.

Rebored, and sleeved the Heavy 10 quickchange

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Rebored, and sleeved the Heavy 10 quickchange

    I recently had to rebore the housing, and sleeve the shafts, and bushings on a couple of SB gearboxes. Did a writeup with pics. It's in PDF format, if anybody wants one. It takes a few minutes to attach it to an email, so would be easier for me if I did several email addy's at once.
    Jim

  • #2
    Thanks Jim. Single or double tumbler? Mine is the old one (single). If its for the early model it would be good info to have. Jrouche at verizon dot net. Thanks, JR
    My old yahoo group. Bridgeport Mill Group

    https://groups.yahoo.com/neo/groups/...port_mill/info

    Comment


    • #3
      Yup...single tumbler....I should have said that in the post. On the way.
      Jim

      Comment


      • #4
        Originally posted by IdahoJim View Post
        Yup...single tumbler....I should have said that in the post. On the way.
        Jim
        Thanks Jim, got it. Great write-up!!!! JR

        Oh?? Where in ID are you. I have family in Pocatello...
        My old yahoo group. Bridgeport Mill Group

        https://groups.yahoo.com/neo/groups/...port_mill/info

        Comment


        • #5
          Hello, IdahoJim

          One of the forum members here started a yahoo group just for this reason (i believe - to post files for free on the net).
          Sorry, forget the members name, but heres a link to his group.
          https://groups.yahoo.com/neo/groups/...o?prop=eupdate

          If you do not feel like joining that group but still would like to have your pdf posted online, drop me a PM to exchange email address and i could post it for you.

          _
          ~ What was once an Opinion, became a Fact, to be later proven Wrong ~
          http://site.thisisjusthowidoit.com
          https://www.youtube.com/user/thisisjusthowidoit

          Comment


          • #6
            Originally posted by JRouche View Post
            Thanks Jim, got it. Great write-up!!!! JR

            Oh?? Where in ID are you. I have family in Pocatello...
            Interesting...I live just north of Blackfoot...small world.
            Jim

            Comment


            • #7
              Originally posted by iMisspell View Post
              Hello, IdahoJim

              One of the forum members here started a yahoo group just for this reason (i believe - to post files for free on the net).
              Sorry, forget the members name, but heres a link to his group.
              https://groups.yahoo.com/neo/groups/...o?prop=eupdate

              If you do not feel like joining that group but still would like to have your pdf posted online, drop me a PM to exchange email address and i could post it for you.

              _
              Many thanks, I sent it to the moderator at SB Lathe Groups. I think it will be on there.
              Jim

              Comment


              • #8
                Hi Jim
                You could upload the file to a site like this:
                http://www.tinyupload.com/
                and just post a link to the file.
                Location: Long Island, N.Y.

                Comment


                • #9
                  Originally posted by IdahoJim View Post
                  Interesting...I live just north of Blackfoot...small world.
                  Jim
                  Yup. Small World. I have been through Blackfoot. Blackfoot is just North of Pocatello right? My Wife's fam lives in Southern Idaho. JR
                  My old yahoo group. Bridgeport Mill Group

                  https://groups.yahoo.com/neo/groups/...port_mill/info

                  Comment


                  • #10
                    Originally posted by RichR View Post
                    Hi Jim
                    You could upload the file to a site like this:
                    http://www.tinyupload.com/
                    and just post a link to the file.
                    Many thanks, Rich. I'll keep that in mind. If it doesn't get posted on the lathegroup soon. I'll have to do something different.
                    Jim

                    Comment


                    • #11
                      Originally posted by JRouche View Post
                      Yup. Small World. I have been through Blackfoot. Blackfoot is just North of Pocatello right? My Wife's fam lives in Southern Idaho. JR
                      LOL...yeah, and to top it off, I was raised in SoCal. Where are you locate down there?
                      Jim

                      Comment


                      • #12
                        Thousand Oaks area... JR
                        My old yahoo group. Bridgeport Mill Group

                        https://groups.yahoo.com/neo/groups/...port_mill/info

                        Comment


                        • #13
                          Ha...I was raised in Simi Valley. Left there after my junior year of high school in 1965. My sister and her husband lived in TI for many years...Bruce & carol Alker.
                          Jim

                          Comment


                          • #14
                            Very small world.... JR

                            Oh... I was born in 65
                            My old yahoo group. Bridgeport Mill Group

                            https://groups.yahoo.com/neo/groups/...port_mill/info

                            Comment


                            • #15
                              Originally posted by JRouche View Post
                              Very small world.... JR

                              Oh... I was born in 65
                              Punk kid...ha!

                              Comment

                              Working...
                              X