Announcement

Collapse
No announcement yet.

Holder for those pain in butt allen wrenchs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Holder for those pain in butt allen wrenchs

    Built some holders for storing allen keys,allen drivers and sockets.




  • #2
    Three or four types of Allen sets in one holder. I love it.

    And is it three or four? Are the ones with screwdriver handles duplicates or standard and ball end?
    Paul A.

    Make it fit.
    You can't win and there is a penalty for trying!

    Comment


    • #3
      Originally posted by Paul Alciatore View Post
      Three or four types of Allen sets in one holder. I love it.

      And is it three or four? Are the ones with screwdriver handles duplicates or standard and ball end?
      Four. Screwdriver style standard and ball end.

      Comment


      • #4
        Very nicely done.

        I've been trying to figure out a design for my Tee Allen wrenches and you've given me an idea. Thanks

        Comment


        • #5
          What material did you use for the stand?

          George

          Comment


          • #6
            Originally posted by Georgineer View Post
            What material did you use for the stand?

            George
            1" UHMW the vertical is 3 laminated together 2 drilled 3rd tapped and sandwich together,base bolted from bottom with counter sink Allen bolts.

            Comment


            • #7
              I'm a cheapskate and just use a bit of wood with holes in it, yours look really professional.

              Comment


              • #8
                Originally posted by Tundra Twin Track View Post
                1" UHMW the vertical is 3 laminated together 2 drilled 3rd tapped and sandwich together,base bolted from bottom with counter sink Allen bolts.
                Were you able to locate the correct size wrench to tighten the Allen bolts!!!!!!!
                How to become a millionaire: Start out with 10 million and take up machining as a hobby!

                Comment


                • #9
                  Originally posted by old mart View Post
                  I'm a cheapskate and just use a bit of wood with holes in it, yours look really professional.
                  That's what I'd do too if I had enough clear bench top to display them. Mine are in various tool box drawers.

                  Comment


                  • #10
                    If I would have that it would be an opportunity to lose them all in the same place at the same time!
                    mark costello-Low speed steel

                    Comment


                    • #11
                      Very nice and I love the strait shaft handled ones!

                      Mine all reside in two drawers in two different boxes. One is metric and standard in their original holders all neat in their spot. The other box and drawer are the loose pile of all random kinds.
                      Andy

                      Comment

                      Working...
                      X