Holder for those pain in butt allen wrenchs

[Tundra Twin Track]

Built some holders for storing allen keys,allen drivers and sockets.

[Paul Alciatore]

Three or four types of Allen sets in one holder. I love it.

And is it three or four? Are the ones with screwdriver handles duplicates or standard and ball end?

[Tundra Twin Track]

Three or four types of Allen sets in one holder. I love it.

And is it three or four? Are the ones with screwdriver handles duplicates or standard and ball end?

Four. Screwdriver style standard and ball end.

[nc5a]

Very nicely done.

I've been trying to figure out a design for my Tee Allen wrenches and you've given me an idea. Thanks

[Georgineer]

What material did you use for the stand?

George

[Tundra Twin Track]

What material did you use for the stand?

George

1" UHMW the vertical is 3 laminated together 2 drilled 3rd tapped and sandwich together,base bolted from bottom with counter sink Allen bolts.

[old mart]

I'm a cheapskate and just use a bit of wood with holes in it, yours look really professional.

[Black Forest]

1" UHMW the vertical is 3 laminated together 2 drilled 3rd tapped and sandwich together,base bolted from bottom with counter sink Allen bolts.

Were you able to locate the correct size wrench to tighten the Allen bolts!!!!!!!

[CCWKen]

I'm a cheapskate and just use a bit of wood with holes in it, yours look really professional.

That's what I'd do too if I had enough clear bench top to display them. Mine are in various tool box drawers.

[Mcostello]

If I would have that it would be an opportunity to lose them all in the same place at the same time!

[vpt]

Very nice and I love the strait shaft handled ones!

Mine all reside in two drawers in two different boxes. One is metric and standard in their original holders all neat in their spot. The other box and drawer are the loose pile of all random kinds.