Announcement

Collapse
No announcement yet.

Metallurgy - High Entropy Alloys

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Metallurgy - High Entropy Alloys

    Don't know if this has been covered previously, but a short introduction to this area of combining approximately equal amounts of 3 or more metals to produce interesting properties was very helpful. Essentially the same effects seen by adding trace amounts of other elements to steel, which breaks up the crystalline regularity can also be achieved and improved by combining equal amounts of differing metals. It's packing baby!

    Doubt many of the readers of this forum have access to the above link in Nature, so the article can also be seen at sci-hub.cc by pasting in this DOI: 10.1038/533306a. This site can be slow to load.

  • #2
    It is interesting to be sure, not new, there's even a word for the stuff, mischmetal, but building eutectic structures externally is new
    Good post
    Mark

    Comment

    Working...
    X