Announcement

Collapse
No announcement yet.

I finally got a raise!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • wierdscience
    replied
    Yes the possiblities are endless,windloads seen that,them electric scissor lifts take first place in the flapjack category,its suprising how far they will bow side ways before they tip over.

    I cleaned up and oiled the outrigger jacks today,gonna try and track down the wiring fualts tommorow,one ore more toggle switches is bad I think.

    Leave a comment:


  • darryl
    replied
    Hey, you could use that lift to get a closer look at arcing in power systems. See the failed switch video that Errol showed us. (volts and amps) Just make sure you put an insulator under each of the castors.

    Leave a comment:


  • ibewgypsie
    replied
    I have used the small platform lifts in the plants.

    We have had to rent them at times too, more than $200 a day.

    They are stable inside. DO not use them where you have wind loads. A bucket truck blowed over with some friends in it, and it has large outriggers.

    Neat aqquisition. SOmetimes nothing else will work. A a-frame ladder perhaps.. but I really hate them things.

    David

    Leave a comment:


  • dbuck
    replied
    Soooo! When's your first bungie jump?

    Leave a comment:


  • SJorgensen
    replied
    That will be great for your lightning experiments!

    Heck, I'd mount an easy chair to it and use it to watch parades and Nascar races. That could have a thousand uses. Weld it into your truck for quick deployment.

    Leave a comment:


  • wierdscience
    replied
    Don't worry,the deer here are nearly tame,they'll never notice the whine of the liftpump Just realised,it has a 350# cap,I can use it to dress with to:

    Its not too unstable,but I wouldn't use it in a wind storm either.I have rented a few like it before and usually tie the bucket off once I'm up.

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Hmmmm! Some strategically placed camo and it would make a terrific deer stand.

    Leave a comment:


  • John Stevenson
    replied
    <font face="Verdana, Arial" size="2">Originally posted by Excitable Boy:
    From a tool obsessed gadget collector perspective, it's cool, but what will you use it for? Outside of scaring the neighbors as I rose above the house suddenly from the back yard on my magic platform, I can't think of a good use for something like that for a home shop.

    What's the deal?

    John

    </font>
    John boy come on.
    That's not the issue, as you have said its a gadget and it's cool NOW you want it to have a use ????????

    As Meatloaf said two outa three aint bad.

    John S.

    Leave a comment:


  • John Stevenson
    replied
    <font face="Verdana, Arial" size="2">Originally posted by Evan:
    Is this like some canoes I have been in where if you switch the chewing gum to the other side of your mouth it goes over? </font>
    Oh did I mention that its mounted on four casters and has these neat little outriggers that fold up so it will fit through a walkin door?Neat!Best part,it cost me 850# of #1scrap,or about $25.00

    Leave a comment:


  • abn
    replied
    I'll give you $100 to drive out to California and trim the fronds of my palm trees with that there contraption...

    Leave a comment:


  • Evan
    replied
    Is this like some canoes I have been in where if you switch the chewing gum to the other side of your mouth it goes over?

    Leave a comment:


  • CCWKen
    replied
    Hey, that's what I need to change bulbs in the shop!

    Leave a comment:


  • wierdscience
    replied
    I took a load of junk to my favorite junkyard today,the owner will trade me pound for pound clean scrap for whatever I find useful.He had this little portable manlift he just got in and asked me if I wanted it,I looked and said sure.

    Its uses a liftgate pump and 12volt battery for power,has a built in charger and has 110vac outlets in the bucket.I got it home and stuck a battery in it,hit the switch and nothing,shorted the solinoid and up she went.

    Now,as for what I'm going to use it for?I am planning a new shop building,this will come in handy for things like screwing down roof metal,hanging lights and conduit and installing the overhead crane hot rails and such.In other words,NO MORE FREAKING LADDERS!

    Oh did I mention that its mounted on four casters and has these neat little outriggers that fold up so it will fit through a walkin door?Neat!Best part,it cost me 850# of #1scrap,or about $25.00

    Leave a comment:


  • Excitable Boy
    replied
    From a tool obsessed gadget collector perspective, it's cool, but what will you use it for? Outside of scaring the neighbors as I rose above the house suddenly from the back yard on my magic platform, I can't think of a good use for something like that for a home shop.

    What's the deal?

    John

    ------------------
    Pursue Excellence and the rest will follow.

    [This message has been edited by Excitable Boy (edited 07-23-2004).]

    [This message has been edited by Excitable Boy (edited 07-23-2004).]

    Leave a comment:


  • wierdscience
    started a topic I finally got a raise!

    I finally got a raise!

    Yep!Its true,infact I got a 25'6" raise,and it didn't even require any cream -

Working...
X