Announcement

Collapse
No announcement yet.

5C Collet Chuck that can use a standad lathe chuck

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 5C Collet Chuck that can use a standad lathe chuck

    Looking for a 5C collet Chuck that can be used in a 3 or 4 jaw chuck. I know Kalamazoo makes one, does anyone else

    Thanks

    Mike
    Mike Hunter

    www.mikehunterrestorations.com

  • #2
    There are 5C collet blocks that are square or hex that work fine in chucks. A set of 1 each is around $40US on eBay.
    Kansas City area

    Comment

    Working...
    X