Announcement

Collapse
No announcement yet.

Pallas horizontal mill, help required please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Pallas horizontal mill, help required please

    Hi I've recently bought Pallas HO horizontal mill, but can't find much information about it.
    Has anyone else worked on one, I'm trying to strip it down so I can move it.
    Any help appreciated
    Thanks


    Last edited by Bigtrev8xl; 02-01-2017, 03:42 PM.

  • #2
    It appears to be a pretty stout milling machine. Tony's has some information on them;

    http://www.lathes.co.uk/pallas/
    Jim H.

    Comment


    • #3
      Sorry, I should've said, I'd seen that page, thanks Jim

      Comment


      • #4
        Here's someone who's stripped and cleaned one up: http://www.unionsteammodels.co.uk/cg...m=1250884394/6

        and a bit more here: http://www.model-engineer.co.uk/foru...?th=122807&p=1

        Looking at the photos, I'd think that a useful improvement would be to add arms to brace the front of the overarm to the knee - just an idea.

        Ian
        All of the gear, no idea...

        Comment

        Working...
        X