Announcement

Collapse
No announcement yet.

CNC

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • bdarin
    replied
    Thanks, John. Ordered book today, looks like a good one. Comes with a CD for CNC "simulation".

    Leave a comment:


  • John Stevenson
    replied
    Bdarin,
    One of the better ones is The CNC Workbook by Frank Nanfara as one of the co authors.
    This has a simulator disk included so you can see what you are doing. Reasonably expensive, about $40 or so.
    Do a search on http://www.abebooks.com with Nanfara as the author and you will find 5 hits.

    John S.

    [This message has been edited by John Stevenson (edited 05-24-2002).]

    Leave a comment:


  • bdarin
    started a topic CNC

    CNC

    I, like many of you, am stuck in the 50's with machining technology. Old low tech equipment, etc. So can anyone recommend a good book on CNC? What it is, and isn't; how it works, what G-code is, etc. To me, CNC is like space travel....I've heard of it but don't the first thing about how to do it.
Working...
X