Announcement

Collapse
No announcement yet.

George, shut me down if this is a bad thing.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    The table moves up and down hence the Z axis. At least that's what I see.
    the Z has a servo.....z is always the the direction parallel to the spindle. With a horizontal the Y is the up and down.

    cnc on a horizontal is certainly not common......I'd want it on the Y and Z.....having it on the X seems useless for most horizontal work....I'm thinking its its there to provide power feed (which is the axis you want power feed on)
    Last edited by Mcgyver; 06-23-2017, 09:54 AM.
    in Toronto Ontario - where are you?

    Comment


    • #17
      Don't we have a guy here trying to figure out how to convert a lathe to a CNC slotting set up? That guy NEEDS this machine!

      Comment


      • #18
        I really really want some room in here. Some one has to want this green elephant.

        Comment


        • #19
          You might try a new thread with a more meaningful subject title.
          http://pauleschoen.com/pix/PM08_P76_P54.png
          Paul , P S Technology, Inc. and MrTibbs
          USA Maryland 21030

          Comment


          • #20
            good idea

            Comment

            Working...
            X