Announcement

Collapse
No announcement yet.

CNC Knurling tool

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    The knurling tool is not very well described.
    It's made by an Austrian firm called Quick at Innsbrook.
    I have found some details but no UK agents.
    I suspect that the knurls being propiatry are expensive but that doesn't matter now as I've made some new bearing sleeves up to accept the recessed side knurls that are freely available all over.
    I bought a pair of straight course knurls from J&L for آ£12 each and also course and medium LH helicals for some experimentation to make a straight knurl holder.

    More on this later with pics.

    The boring head is a Austrian Kaiser head and the taper is special to them.
    I have no idea if it fits some kind of jig borer they make but they do make adaptor sleeves to R8, various types of quick fit 30 taper and also BT, CAT and ISO 40 tapers.

    Until I get this I don't know what taper it has, I supect it's smaller than the two I already have on two other Kaiser boring and facing heads but an adaptor is only a simple turning, boring and tapping exercise.

    ------------------
    John S.
    Nottingham, England
    .

    Sir John , Earl of Bligeport & Sudspumpwater. MBE [ Motor Bike Engineer ] Nottingham England.



    Comment

    Working...
    X