Announcement

Collapse
No announcement yet.

OT: Disposal of carwash chemicals/cleaners?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    1. It should have been the seller's responsibility to remove them. Try to force him to do it.
    2. If the seller will not dispose of them, check for your local hazardous waste disposal site. Most larger municipalities have one.

    Comment


    • #17
      The prior owner seems to have been technically in foreclosure, the bank agreed to a short sale. That is not like the usual sale, and I do not know how much influence he new owner can have. Likely not much, so he is probably stuck with getting rid of it himself.

      It's not too complicated here, really just trying to discover if typical carwash cleaners and "sealers" have any unusual disposal requirements IF they cannot be somehow presented to someone who actually wants them.

      BTW, the armorall site is all "fluff" and way light on things like MSDS.... they don't have any. Probably, since there is a "call if you are a business" number, you have to be a business to get that level of info. When he gets back, he may want to make that call.
      CNC machines only go through the motions.

      Ideas expressed may be mine, or from anyone else in the universe.
      Not responsible for clerical errors. Or those made by lay people either.
      Number formats and units may be chosen at random depending on what day it is.
      I reserve the right to use a number system with any integer base without prior notice.
      Generalizations are understood to be "often" true, but not true in every case.

      Comment


      • #18
        Originally posted by J Tiers View Post
        BTW, the armorall site is all "fluff" and way light on things like MSDS.... they don't have any. Probably, since there is a "call if you are a business" number, you have to be a business to get that level of info. When he gets back, he may want to make that call.
        Don't over think qualifiers like that. Just try to find the right line (saves hassle on both ends) call the one most likely to have your info. If they don't, they can probably give you an educated guess as to who to ask next.

        Comment


        • #19
          Armor All MSDS sheets;



          Carwash products about halfway down. By law, they must be available to the public.
          Jim H.

          Comment


          • #20
            Interesting... searched for "MSDS" in site search and got nothing. (Yes I know about that old law, likely repealed now, or soon.)

            The first one I checked referred to local , state etc laws for disposal. Much info "not هvailable". But the upshot seemed to be it can go in the drain, so long as it is not a storm sewer. Not that dumping is a good idea.
            CNC machines only go through the motions.

            Ideas expressed may be mine, or from anyone else in the universe.
            Not responsible for clerical errors. Or those made by lay people either.
            Number formats and units may be chosen at random depending on what day it is.
            I reserve the right to use a number system with any integer base without prior notice.
            Generalizations are understood to be "often" true, but not true in every case.

            Comment


            • #21
              The solution to pollution is dilution.

              Carwashes do dilute the products in use. If they are similarly diluted, disposal in sanitary drains is probably OK. Dumping the concentrated product not so much.
              Jim H.

              Comment


              • #22
                Just do what Andy would do - poor in toilet, push handle,,, that simple

                all jesting aside, esp. you flat landers have to be extra careful what your throwing down the pipes or it just comes back to haunt you,,, there is so much stuff in the water now and it's doing some crazy things, our water here is in much better condition that way but we've got our own worries with more natural compounds such as arsenic and cyanide from past and present mining operations,

                but at least things like prescription drugs and birth control are at a minimum due to being higher up on the water table chart and taking it directly from the river,,, still have a few smaller towns upstream but we also have lots of CFS throughout the year to damper the effects,,, this is water that has been put through a distillation process and is in the form of either rain or snow melt...

                it's not just my imagination that when I go back east to visit family there's allot more guys walking around with "moobs"

                so much so that many could seriously use a sports bra, some is due to not only whats in the water but also things like plastic bottles that contain a chemical that mimics estrogen...

                there is also the fact that I live in one of the leanest states in the U.S. (and believe me that's not saying much) and this only compounds the problem back there as the extra weight gain does not help...
                Last edited by A.K. Boomer; 11-03-2017, 10:38 AM.

                Comment


                • #23
                  Dumping large quantities of the concentrated product down the drain might create severe problems at the sewage treatment plant such as poisoning the bacteria used in secondary treatment.
                  Location: Saskatoon, Saskatchewan, Canada

                  Comment


                  • #24
                    Originally posted by J Tiers View Post
                    ........ Much info "not هvailable".
                    Anybody else see a tiny little oval over the first 'a' in 'available' above? ...what's with that? You got a bad keyboard there, J Tiers?

                    Hmmm.. now it looks more circular in my post.
                    Lynn (Huntsville, AL)

                    Comment


                    • #25
                      Consider that the buyer surely saw the large quantity of chemicals before buying the property. It is assumed they received a discount in price in exchange for assuming the liability of proper disposal. Though it is not clear whether that aspect of the transfer was lawful, that's a lawyer question.

                      You can't buy this stuff in the store because it is typically highly concentrated and potentially toxic. Some of it, due to age, may now be outlawed for use. Concentrated hydrofluoric acid? Concentrated phosphates?

                      Someone should report the renter to the appropriate state regulatory agency. He likely had a permit to operate and use those chemicals, and he may seek renewal or new permits in the future. It makes you wonder how he disposed of other waste.

                      Commercial businesses require wastewater discharge permits. Getting those permits requires a disclosure of the specific chemicals. and an approved treatment and disposal plan. Depending on type and condition, they may require filtering or other pre-treatment and neutralization. Or they may require commercial hauling.

                      Loading that stuff in a vehicle and driving around with it? It very likely requires a DOT number, possibly appropriate badges on the vehicle and maybe a CDL.

                      The 'just dilute it and pour it down the drain' suggestions are offensive, especially without knowing what is present. That shifts the burden (of this profit) to the community and other taxpayers. The fines for that could be huge, and as mentioned it could have serious consequences at the wastewater treatment plant.

                      Also, diluting it to 'acceptable levels' may require tens of thousands of gallons of water. How could anyone reasonably do that? Maybe a siphon setup that adds 5 three drops to your toilet each time it is flushed. In ten years, it will be done?

                      Comment


                      • #26
                        If the chemicals, so called, are soap, that should be no issue. Otherwise, not known.

                        As for the "he shoulda known" stuff, well, it's worth every penny I am paying for the advice. It's not my problem, and I figured to ask as a favor to my friend and see if anyone who ACTUALLY KNOWS about the carwash biz and the cleaners etc, would answer. So far, well..... The cleanup on the ones I have checked out end up with basically "soak up as much as possible, wash the rest down the drain", so there you are.

                        I will have to look up the MSDS on Dawn detergent.... Bet it says about the same thing.... "obey all local and state etc regulations......" with a list of protective clothing, etc. It tends to be standard boilerplate text, put in as a CYA, since NOBODY will put in a statement that anything is harmless and safe to put down the drain.

                        Yep, about as expected.....

                        P&G is improving everyday life as a Force for Growth and a Force for Good — for you, for the world, and for generations to come.


                        Originally posted by lynnl View Post
                        Anybody else see a tiny little oval over the first 'a' in 'available' above? ...what's with that? You got a bad keyboard there, J Tiers?

                        Hmmm.. now it looks more circular in my post.
                        Sorry, using the new national keyboard here, never had to do that before we seceded.....
                        Last edited by J Tiers; 11-03-2017, 04:37 PM.
                        CNC machines only go through the motions.

                        Ideas expressed may be mine, or from anyone else in the universe.
                        Not responsible for clerical errors. Or those made by lay people either.
                        Number formats and units may be chosen at random depending on what day it is.
                        I reserve the right to use a number system with any integer base without prior notice.
                        Generalizations are understood to be "often" true, but not true in every case.

                        Comment


                        • #27
                          Put it by the curb, gone by the next morning. I would think if it were still viable to use in car washes the ex owner if he still has car washes would want it. Has anyone contacted him?

                          Comment


                          • #28
                            Originally posted by flylo View Post
                            Put it by the curb, gone by the next morning. I would think if it were still viable to use in car washes the ex owner if he still has car washes would want it. Has anyone contacted him?
                            His name and location are not known. He rented some time ago.

                            Those issues are really not the point.

                            Just suppose the place was bought as a foreclosure, and you will understand. Sort of like what the guy who owned the machine before the guy you bought it from did..... Got it?
                            CNC machines only go through the motions.

                            Ideas expressed may be mine, or from anyone else in the universe.
                            Not responsible for clerical errors. Or those made by lay people either.
                            Number formats and units may be chosen at random depending on what day it is.
                            I reserve the right to use a number system with any integer base without prior notice.
                            Generalizations are understood to be "often" true, but not true in every case.

                            Comment


                            • #29
                              Well, the resolution on the matter has been found.

                              He put it on CL, and the whole lot of it is now GONE, without any effort except typing and watching over the other stuff in the garage. Everyone is just as happy as a clam in mud!

                              Much simpler than the other possibilities. Thank you for the suggestions and info in any case, it could have come down to havig to deal with the stuff directly.
                              CNC machines only go through the motions.

                              Ideas expressed may be mine, or from anyone else in the universe.
                              Not responsible for clerical errors. Or those made by lay people either.
                              Number formats and units may be chosen at random depending on what day it is.
                              I reserve the right to use a number system with any integer base without prior notice.
                              Generalizations are understood to be "often" true, but not true in every case.

                              Comment

                              Working...
                              X