.png)
Tweet
Seriously, I've looked. How do you do it?
-
--
Bob La Londe
Professional Hack, Hobbyist, Wannabe, Shade Tree, Button Pushing, Not a "Real" machinist​
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I always wanted a welding stinger that looked like the north end of a south bound chicken. Often my welds look like somebody pointed the wrong end of a chicken at the joint and squeezed until something came out. Might as well look the part. -
--
Bob La Londe
Professional Hack, Hobbyist, Wannabe, Shade Tree, Button Pushing, Not a "Real" machinist​
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I always wanted a welding stinger that looked like the north end of a south bound chicken. Often my welds look like somebody pointed the wrong end of a chicken at the joint and squeezed until something came out. Might as well look the part.Comment
-
Its only that way cause you live on the other side of the planet. JROriginally posted by Bob La Londe View PostComment
-
It seems like you did find a way.
Micorsoft Paint will allow you to turn that photo to the correct orientation:
I suspect you took it with a cell phone's camera. Next time, trying turning the cell phone 90 degrees to the left before taking the photo and it will probably come out right side up.
If you want the short strokes of George's procedure, I posted them here. Step #8 is not obvious, but it must be done. So don't miss that.
Originally posted by Bob La Londe View PostPaul A.
SE Texas
And if you look REAL close at an analog signal,
You will find that it has discrete steps.Comment
-
Also, don't upload more than you're going to post within an hour. If the picture(s) is not used within an hour, it gets deleted.
Comment
-
There is the 18 step process as I use to and stumble thru the photobucket debacle or you can use tapatalk,instant and free.Edwin DirnbeckOriginally posted by Bob La Londe View PostComment
-
New horizontal mill Bob?
Comment
-
lol irlOriginally posted by dan dubeau View Postnew horizontal mill bob?--
Bob La Londe
Professional Hack, Hobbyist, Wannabe, Shade Tree, Button Pushing, Not a "Real" machinist​
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I always wanted a welding stinger that looked like the north end of a south bound chicken. Often my welds look like somebody pointed the wrong end of a chicken at the joint and squeezed until something came out. Might as well look the part.Comment
-
Testing
Comment
-
What is this?
The root URL displays "No Signal", and the "/pictures" directory says "Nobody home".Code:http://bbssystem.com/pictures/abc1.jpg
http://pauleschoen.com/pix/PM08_P76_P54.png
Paul , P S Technology, Inc. and MrTibbs
USA Maryland 21030Comment
-
Same as thisOriginally posted by PStechPaul View Post
Code:[SIZE=4][COLOR=#ff0000][B]http://[/B][/COLOR][COLOR=#0000cd][B]w[/B][/COLOR][COLOR=#ee82ee][B]w[/B][/COLOR][COLOR=#4b0082][B]w[/B][/COLOR][COLOR=#ff0000][B].[/B][/COLOR][COLOR=#ffff00][B]m[/B][/COLOR][COLOR=#40e0d0][B]et[/B][/COLOR][COLOR=#ff0000][B]a[/B][/COLOR][COLOR=#0000ff][B]l[/B][/COLOR][COLOR=#ff0000][B]i[/B][/COLOR][COLOR=#000000][B]l[/B][/COLOR][COLOR=#ff0000][B]ln[/B][/COLOR][COLOR=#ffa07a][B]ess[/B][/COLOR][COLOR=#ff0000][B].[/B][/COLOR][COLOR=#00ff00][B]c[/B][/COLOR][COLOR=#ff0000][B]o[/B][/COLOR][COLOR=#000000][B]m[/B][/COLOR][COLOR=#ff0000][B]/pictures/abc1.jpg[/B][/COLOR][/SIZE]
Comment
-
Originally posted by 3 Phase Lightbulb View PostTesting
Is that the new door from the thread where the contractor tried to install/have a tiny opening that you could only crawl through?Comment
-
Yup. Our summer house is almost done now. A few more weeks and we should get our occupancy permit.Originally posted by dave_r View PostComment
-
Not likely! At least not once they find out your real plan is for a machine shop!Originally posted by 3 Phase Lightbulb View PostComment
.png)
Comment