Announcement

Collapse
No announcement yet.

Digital Linear Scale Mount For Lathe

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • CCWKen
    replied
    The theory is good and you did a great job making the brackets...But... Unless the scale is an "absolute" model, it won't be accurate after you move the carriage twice. Been there, done that.

    Leave a comment:


  • Chipster
    started a topic Digital Linear Scale Mount For Lathe

    Digital Linear Scale Mount For Lathe

    I made these pieces to attach an 8" linear scale to the carriage and bed on my lathe x-axis. I wanted to be able to install and remove the scale without using tools. I glued in magnets to hold the parts in place on the lathe.


    Last edited by Chipster; 07-17-2019, 09:14 PM.
Working...
X