Announcement

Collapse
No announcement yet.

WW 2 machining book ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • WW 2 machining book ?

    I heard of a book put out by the us government during WW 2 on techniques to do unusual work on regular machine shop equipment. Anyone have a title or info on this, I'd really like to scrounge a copy.

  • #2
    I think Lindsay Books may have reprinted it.
    http://www.lindsaybks.com/
    ----------
    Try to make a living, not a killing. -- Utah Phillips
    Don't believe everything you know. -- Bumper sticker
    Everybody is ignorant, only on different subjects. -- Will Rogers
    There are lots of people who mistake their imagination for their memory. - Josh Billings
    Law of Logical Argument - Anything is possible if you don't know what you are talking about.
    Don't own anything you have to feed or paint. - Hood River Blackie

    Comment


    • #3
      I went to Lindsays site, but I didn't see anything like that on there. Of course I'm not the sharpest stick in the woods either so I might have missed it.

      Comment


      • #4
        Your not looking for this are you?

        www.machinist.org/army_machinetool/

        Comment


        • #5
          As long as we're talking DOD manuals, does anyone know of an online version or even a link to the Navy Patternmaker's Manual?

          Dave


          Comment


          • #6
            <font face="Verdana, Arial" size="2">Originally posted by Dave Opincarne:
            As long as we're talking DOD manuals, does anyone know of an online version or even a link to the Navy Patternmaker's Manual?

            Dave

            </font>
            No,but I got the print version,not much how to,but plenty of theory,plus they show you just what you can get away with in defects.

            I just need one more tool,just one!

            Comment


            • #7
              Oh I don't know WS. If we're talking the same ones (one or two volumes for mates ratings and a seperate one for chief's rating IIRC) I thought there was a lot if practical information in them. I've read through them, but would like to have a set for myself. IMNSHO they're the second best reference for patternmaking after the AFS text. Where did you get your copy?

              Dave

              Comment


              • #8
                Okay,we might actually be talking about two sets,I have one of the USN canvas covered doggeared editons,maybe one of a series,it does mainly cover moulding and pouring with a chapter or two on core making.
                I got that one from and old man I knew who was a motorman 1st class on a sub tender.He said the ship he sailed on during the war had patterns for most of the common wear componets stationed in the shop foundry,the rest they used original parts for the patterns.
                The other set is five volumes about 4x6" and 5/8-1" thick,eelskin bound and covers everything from a-z,but in a summary just what you need to know format.
                But then remember it is the Navy,so there is no telling what they have in stores.I am amazed at what they pull out of mothballs and sell at auction,just saw an Oliver straight-o-plane,24" 15hp 3~ sell for $1200,wish I had the money.

                [This message has been edited by wierdscience (edited 11-21-2004).]
                I just need one more tool,just one!

                Comment


                • #9
                  I have a copy of the WW II book. It's called, Standard and Emergency shop procedures. It was written by Fred Colvin and I'm not sure if Lindsay's still has it.

                  Comment


                  • #10
                    Lindsay used to have the pattern maker manual, with the prefix "the government finally did samething right". I can't find my Lindsay catalog right this minute, so you'll have to use your own to get the number.

                    I got my copy by writing a very polite letter to my Congressman, asking to have someone on his staff get one for me. It came right along. I got the impression that when a Congressperson asked the Navy printing office, things happened promptly.

                    Hope one of these works for you.

                    George

                    Comment


                    • #11
                      Ok at least now I know what its called. Oldsarge is it pretty good? Worth the time trying to find one in your opinion?

                      Comment


                      • #12
                        Wanna 577:
                        It's an interesting book, especially if you like huge machine tools. Actually, I picked up an idea or two that made a couple of projects easier.

                        Comment


                        • #13

                          The navy patternmaker book is hard to find as they have discontinued the the rate but I may be able to find you one dave.
                          The navy MR(machinery repairman 3&2 book) is availible on CD, as this is an unclassified document you can write the DOD and get it for a couple of bucks, maybe I can score one from one of the sailors in exchange for some carbide bits from the shop.
                          Non, je ne regrette rien.

                          Comment


                          • #14
                            Think I found them on CD:
                            http://www.military-media.com/Mercha...ory_Code=TRAIN

                            but it says that they are 'training courses' rather than training manuals. Are these the right ones?


                            I'd rather have them on paper myself, though.

                            Comment

                            Working...
                            X