Announcement

Collapse
No announcement yet.

Blueprint books

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Blueprint books

    Hi. Can anyone point me to some good project books.
    Thanks
    Anthony

  • #2
    Try our sponsors:

    http://www.homeshopmachinist.net/store/


    Jerry

    Comment


    • #3
      Anthony I see this is your first post here. Welcome! Have you just newly found this site? If that's the case, and you're not familiar with the "Home Shop Machinist" and "Metal Working" magazines published you should check them out..they offer a lot of projects, and publish them in hardback book form. They're great books.
      Lynn (Huntsville, AL)

      Comment


      • #4
        Oops. (Double post.)

        [This message has been edited by lynnl (edited 01-02-2005).]
        Lynn (Huntsville, AL)

        Comment


        • #5
          Welcome to the board.

          You might also try some searches on the web on particular subjects like steam engines, lathe accessories, etc. A lot has been put on line. I have downloaded a bunch of articles from some of the older magazines and am keeping them for future ref.

          Paul A.
          Paul A.
          SE Texas

          And if you look REAL close at an analog signal,
          You will find that it has discrete steps.

          Comment


          • #6
            Try http://www.wiseowlmagazines.com/MEbooks.html

            If some of these titles appeal to you, many of them are also available from www.powells.com, and from their brick-and-mortar Technical Books store in Portland, OR.

            What kind of projects? How about a clock? Try http://www.clockmakersnewsletter.com/
            where you can get the "Making a Foliot Clock" book. That was a very fun project.

            Comment

            Working...
            X