Announcement

Collapse
No announcement yet.

Thanks to who suggested it

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Thrud
    replied
    Looks like it could be a 69 in one to me

    Leave a comment:


  • spkrman15
    replied
    that is what i like about this BBS. You take a good idea and make it better!

    Spkrman15

    P.S. Is this a 4 in 1 lathe?

    Leave a comment:


  • Alistair Hosie
    replied
    I see now with my glasses on the young lady isn't displaying her cup chucks at all I think that must be some kind of oversize travelling steadies she has strapped to her.

    Leave a comment:


  • charlie coghill
    replied
    Looked at the drill chart than noticed the lathe. it is the pitts getting old.

    Leave a comment:


  • spope14
    replied
    Where can I get this Decimal chart? I like the pair of lathes.

    Leave a comment:


  • jstinem
    replied
    The girls in the pictures don't get older unless you let them!
    I worked in shop where the calendar was stuck on Dec. of '66 because the boss liked the picture. When I reminded him the she was about 50 by then he said things I won't repeat and I thought I was about to be fired. We were frends but we spoke about the calendar again.

    Leave a comment:


  • Thrud
    replied
    Good thing they don't use those at the optometrist - "Doc, I can't see no letters - I'm blind"!



    [This message has been edited by Thrud (edited 07-19-2002).]

    Leave a comment:


  • docsteve66
    replied
    took me awhile to see that a lathe and cahrt were on pic. Wife saw the lathe immediately. Test it on your wives

    Leave a comment:


  • lynnl
    replied
    ...but his tool post grinder was already worn out.

    I predict a long run for this thread.

    [This message has been edited by lynnl (edited 07-20-2002).]

    Leave a comment:


  • Alistair Hosie
    replied
    looks like a nice lathe to me and I see the present owner is throwing in a couple of large cup chucks Alistair

    Leave a comment:


  • Herb W
    replied
    Lathe?...Oh, sure 'nuff, there is a lathe..

    Leave a comment:


  • Milacron of PM
    replied
    Is this it ?



    (bet you didn't know Prazi was such a "hot" little lathe, huh ? )

    Leave a comment:


  • C. Tate
    replied
    Yeah, drill and tap charts are free and haven't changed in 100 years those centerfolds cost and the women get old. Protect those things

    Leave a comment:


  • Thrud
    replied
    spkrman15:

    I think we told you to get your centerfolds laminated...

    Leave a comment:


  • spkrman15
    started a topic Thanks to who suggested it

    Thanks to who suggested it

    Heya guys,

    I don't remember who suggested it but thanks for the idea of getting my drill and tap chart laminated. It looks great and is now well protected. So thanks

    Spkrman15
Working...
X